• WEDGING

    The first step in making my work is to cut up the clay and weigh it so all the pieces of clay are the correct weight for the shape I’ll be making. I then wedge the clay to make it consistent and work out any air bubbles.

  • THROWING

    Most of my work is made on the potter’s wheel. After it comes off the wheel, the clay is very soft, and needs to dry out until it is firm enough to continue to work with it.

  • TRIMMING

    Once the clay has dried to the point where it can't be bent, but can still be dented with a fingernail (a stage called leather hard), I turn my bowls and plates over and trim away the extra clay to create a nice foot.

  • Column

    To make my handles, I attach a piece of soft clay to the leather-hard mug, pull it to stretch it out into shape, then attach it to the bottom of the mug. It takes me longer to use this method, but allows me to make a comfortable handle that is thin in the middle and thicker at the top and bottom attachment points.

  • Column

    After the work dries completely, I load it into the kiln for the first firing to over 1700F. This makes the work less fragile for glazing, allows for consistent glaze thickness, and removes all water down to the molecular level so they can never be turned back into workable clay.

  • Column

    Glaze is essentially a layer of glass. I formulate, test, and mix my own glazes using water and dry raw materials. I dip the bisqued pieces in my glaze and load them in the kiln for the second firing, which goes to 2170F in order for the glaze to melt properly.

  • Column

    I create my images through a combination of drawing by hand, found imagery, and digital editing in Photoshop and Illustrator. I also take photos of textures I find interesting and layer them into my images.

  • Column

    I print my own decals, and after the glaze firing, I apply them to the finished surface and put them back in the kiln for a third firing. The decal paper burns away, but the iron oxide in the black ink sets into the glaze and transfers the image.

  • GOLD

    On some pieces, I do a final fourth firing with custom 20k gold decals